Optimization design of seal strip for garbage transfer container based on genetic algorithm

Journal Information

J. Hefei Univ. Tech. (Nat. Sci.), Aug.2023, Vol.46 No.8: 1052-1056, 1114

DOI: 10.3969/j.issn.1003-5060.2023.08.007

Authors

ZHOU Zhiyong $ ^{1,2,3} $, SHEN Haihong $ ^{4} $, HUANG Changying $ ^{4} $, GUO Yuwen $ ^{4} $, ZHANG Ou $ ^{4} $, CAI Yonghua $ ^{1,2,3} $

(1. Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan 430070, China; 2. Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan 430070, China; 3. School of Automotive Engineering, Wuhan University of Technology, Wuhan 430070, China; 4. Shanghai Environmental Logistics Co., Ltd., Shanghai 201900, China)

Abstract and Keywords

Abstract: In view of the leakage of special container for multimodal transport in Shanghai City, the structural shape parameters of container seal strip were optimized. Firstly, analysis software was used to carry out the modelling of container seal strip and the force analysis. Then, the shape, height and width of the seal strip were designed by using the neural network and genetic algorithm (GA). Finally, the performance of the seal strip before and after optimization was compared. After optimizing the seal strip, the stress and compression force decreased, but the contact length increased. The optimized seal strip can solve the leakage of the box.

Keywords: seal strip; structural parameter; optimization design; neural network; genetic algorithm(GA)

作者信息

周志勇 $ ^{1,2,3} $，沈海红 $ ^{4} $，黄长缨 $ ^{4} $，郭玉文 $ ^{4} $，张欧 $ ^{4} $，蔡永华 $ ^{1,2,3} $

（1. 现代汽车零部件技术湖北省重点实验室，湖北武汉 430070；2. 汽车零部件技术湖北省协同创新中心，湖北武汉 430070；3. 武汉理工大学汽车工程学院，湖北武汉 430070；4. 上海环境物流有限公司，上海 201900）

摘要和关键词

摘要: 针对上海市联运式专用集装箱在工作过程中密封不严的状况, 文章对集装箱密封条的结构形状参数进行了优化设计。首先应用分析软件对集装箱密封条进行建模和受力分析, 然后应用神经网络与遗传算法相结合对密封条形状、高度以及宽度等参数进行设计, 最后对比优化前后密封条的各项性能。密封条优化后, 应力下降, 压缩力减少, 接触长度增加, 能有效解决箱体的渗漏状况。

关键词: 密封条；结构参数；优化设计；神经网络；遗传算法

Funding

国家自然科学基金资助项目（52175111）

合肥工业大学学报(自然科学版)

Navigation