中文 | English

J. Hefei Univ. Tech. (Nat. Sci.)

合肥工业大学学报(自然科学版)

JOURNAL OF HEFEI UNIVERSITY OF TECHNOLOGY (NATURAL SCIENCE)

Competent Authorities: Ministry of Education of the People's Republic of China

Sponsor by: Hefei University of Technology

ISSN 1000-1646, CN 34-1001/N

Study of rolling-sliding friction and wear and thermal fatigue damage of laser-clad HSS coating

Download Full Text

激光熔覆 HSS 涂层滚滑动摩擦磨损及热疲劳损伤研究

Journal Information

J. Hefei Univ. Tech. (Nat. Sci.), Dec.2023, Vol.46 No.12: 1629-1634

DOI: 10.3969/j.issn.1003-5060.2023.12.007

Authors

HE Yunbin, KE Qingdi, WEI Chen

(School of Mechanical Engineering, Hefei University of Technology, Hefei 230009, China)

Abstract and Keywords

Abstract: In response to the complex failure behavior of the rolled parts during the use of remanufacturing rollers under high pressure and high temperature, this paper used laser cladding technology to prepare M4 high-speed steel (HSS) coating on ductile iron core material. The friction, wear and thermal fatigue properties of the HSS coating were studied using a high-temperature rolling-sliding friction, wear and thermal fatigue testing machine. The results show that the microstructure of the HSS coating is mainly martensite, a small amount of residual austenite, and alloy carbides. The coating has a microhardness of 823 $ HV_{0.5} $, and has good wear resistance and heat resistance. In the form of rolling-sliding friction and wear, as the surface contact temperature increases, the wear mechanism of the coating changes and the wear amount gradually decreases. At 440 °C, it exhibits fatigue wear and slight oxidation wear, at 525 °C, it exhibits oxidation wear and fatigue wear, and at 580 °C, it mainly exhibits oxidation wear.

Keywords: laser cladding; roll remanufacturing; high-speed steel(HSS) coating; wear; thermal fatigue

作者信息

何云斌，柯庆镝，蔚辰

（合肥工业大学机械工程学院，安徽合肥230009）

摘要和关键词

摘要: 针对再制造轧辊使用过程中受高压高温作用, 轧件易发生复杂的失效行为, 文章采用激光熔覆技术在球墨铸铁芯材上制备 M4 高速钢(high-speed steel, HSS) 涂层, 利用高温滚滑动摩擦磨损与热疲劳试验机研究 HSS 涂层的摩擦磨损及热疲劳性能。结果表明: HSS 涂层显微组织主要为马氏体、少量残留奥氏体和合金碳化物, 涂层维氏硬度为 823 $ HV_{0.5} $, 具有良好的耐磨性、耐热性。在滚滑动摩擦磨损形式下, 随着表面接触温度的升高, 涂层磨损机制发生改变, 磨损量逐渐降低。440 ℃ 时表现为疲劳磨损和轻微氧化磨损, 525 ℃ 时表现为氧化磨损和疲劳磨损, 580 ℃ 时以氧化磨损为主。

关键词: 激光熔覆；轧辊再制造；高速钢（HSS）涂层；磨损；热疲劳

Funding

国家自然科学基金资助项目（51975176）

Previous Next

Back to Contents