合肥工业大学校徽

合肥工业大学学报自科版

合肥工业大学学报(自然科学版)

JOURNAL OF HEFEI UNIVERSITY OF TECHNOLOGY (NATURAL SCIENCE)

主管：中华人民共和国教育部

主办：合肥工业大学

ISSN 1003-5060, CN 34-1083/N

量子元胞自动机三输入标准函数的优化设计

Optimization design of three-input standard functions in quantum cellular automata

期刊信息

合肥工业大学（自然科学版），2023年10月，第46卷第10期：1369-1373

DOI: 10.3969/j.issn.1003-5060.2023.10.011

作者信息

张辉，解光军，张永强

（合肥工业大学微电子学院，安徽合肥230601）

摘要和关键词

摘要: 量子元胞自动机(quantum cellular automata, QCA)以其小尺寸、低功耗、高速度等特点被认为是一种有望取代互补金属氧化物半导体(complementary metal-oxide-semiconductor, CMOS)的新兴技术,但是其电路设计中导线交叉一直是个难点问题,该问题不仅带来相当高的设计成本,还会增加电路的复杂性和噪声敏感性。文章通过使用一些全新的逻辑门,重新设计了13种三输入标准函数,新设计实现了无导线交叉的目标,并且与之前最好的设计相比,在总的元胞数量、电路面积和延迟等方面分别优化了18.4%、15.4%、21.2%。

关键词: 量子元胞自动机（QCA）；QCA逻辑门；标准函数；导线交叉

Authors

ZHANG Hui, XIE Guangjun, ZHANG Yongqiang

(School of Microelectronics, Hefei University of Technology, Hefei 230601, China)

Abstract and Keywords

Abstract: Quantum cellular automata(QCA) is considered as a new technology that is expected to replace complementary metal-oxide-semiconductor (CMOS) because of its small size, low power consumption and high speed. However, wire crossing has always been a difficult problem in its circuit design, which not only brings considerable design cost, but also increases the complexity and noise sensitivity of the circuit. In this paper, 13 kinds of three-input standard functions are redesigned by using some new logic gates. These new designs achieve the goal of no wire crossing, and the total cell count, circuit area, and latency are optimized by 18.4%, 15.4%, and 21.2%, respectively, compared with those of the best previous designs.

Keywords: quantum cellular automata(QCA); QCA logic gate; standard function; wire crossing

基金信息

国家自然科学基金区域创新发展联合基金资助项目（U19A2053）

前一篇后一篇

返回期刊目录