Pd/Rh 基三效催化器分区涂覆的优化设计研究-学报杂志社

期刊信息

合肥工业大学（自然科学版），2025年8月，第48卷第8期：1022-1031

DOI: 10.3969/j.issn.1003-5060.2025.08.003

作者信息

翟长辉 $ ^{1,2} $，杨志浩 $ ^{1,2} $，潘涛 $ ^{3} $，龚震 $ ^{3} $，邱亮 $ ^{3} $，钱叶剑 $ ^{3} $

(1. 内燃机与动力系统全国重点实验室，山东潍坊 261061；2. 潍柴动力股份有限公司，山东潍坊 261061；3. 合肥工业大学汽车与交通工程学院，安徽合肥 230009)

摘要和关键词

摘要: 为研究分区涂覆工艺对Pd/Rh基三效催化器(three-way catalytic converter, TWC)起燃性能的影响机制,文章建立基于分区涂覆的催化器和反应机理模型,结合台架起燃数据标定并验证模型的准确性,探究贵金属配比、前后分区长度、贵金属负载量3个关键因素对TWC起燃性能的作用规律,并运用正交试验法开展Pd/Rh基TWC分区涂覆优化设计。研究结果表明:当负载量一定时, $ m(\mathrm{Pd}):m(\mathrm{Rh})=10:1 $工况下催化器催化性能优于 $ m(\mathrm{Pd}):m(\mathrm{Rh})=5:1 $和 $ m(\mathrm{Pd}):m(\mathrm{Rh})=20:1 $;分区长度和前后区负载量比值均会显著影响催化器起燃性能,当前区长度为45 mm、后区长度为73 mm且前后区负载量比值为10:1时,催化器的综合催化性能最佳。正交试验结果表明,影响TWC整体催化转化效率最关键的因素是前后区的负载量比值。

关键词: 三效催化器（TWC）；分区涂覆；起燃性能；正交试验方法；Pd/Rh 双金属

Authors

ZHAI Changhui $ ^{1,2} $, YANG Zhihao $ ^{1,2} $, PAN Tao $ ^{3} $, GONG Zhen $ ^{3} $, QIU Liang $ ^{3} $, QIAN Yejian $ ^{3} $

(1. State Key Laboratory of Engine and Powertrain System, Weifang 261061, China; 2. Weichai Power Co., Ltd., Weifang 261061, China; 3. School of Automobile and Traffic Engineering, Hefei University of Technology, Hefei 230009, China)

Abstract and Keywords

Abstract: In order to investigate the effect of zonal coating on the ignition performance of Pd/Rh-based three-way catalytic converter (TWC), a zonal coating-based catalytic converter and reaction mechanism model was developed, and the model was calibrated and validated based on the bench-scale ignition data, so as to investigate the influence of three key factors, namely the ratio of noble metal, the length of the front and rear zones, and the amount of noble metal loading, on the ignition performance of the TWC. The orthogonal test method was used to optimize the design of Pd/Rh-based TWC zonal coating. The results showed that under the condition that the $ m(\mathrm{Pd}):m(\mathrm{Rh}) $ was 10:1, the catalytic performance of the TWC was better than that under the ratios of 5:1 and 20:1 at a certain loading level. The length and load ratio of the front and rear zones significantly affected the ignition performance of the TWC, and the overall catalytic performance of the TWC was best when the length of the front zone was 45 mm, the length of the rear zone was 73 mm, and the load ratio of the front and rear zones was 10:1. The results of the orthogonal test showed that the most critical factor affecting the overall catalytic efficiency of the TWC was the load ratio of the front and rear zones.

Keywords: three-way catalytic converter(TWC); zonal coating; ignition performance; orthogonal test method; Pd/Rh bimetallic

基金信息

国家自然科学基金资助项目（52106139）；安徽省科技重大专项资助项目（202003a05020023）；内燃机与动力系统全国重点实验室开放基金资助项目（SKLEPS-202104）和中央高校基本科研业务费专项资金资助项目（JZ2023HGQA0139）

合肥工业大学学报(自然科学版)

导航菜单

Pd/Rh 基三效催化器分区涂覆的优化设计研究